ViOptix Intra.Ox 2.0, Инструкция по эксплуатации

Страница: 11 / 26

Part number:
OXY-2-DUR-IFU-1 Rev A
CONFIDENTIAL
Page 11 of 26
5.1.3 Step 3: Battery Installation
4. The non-sterile operator holds up the reusable main unit and attaches the battery pack
to the back of the device. It will attach to the device with magnets.
5. As soon as the battery pack is connected, the OLED screen of the device will turn on.
The non-sterile operator will see the Test Pattern, followed by the ViOptix logo.
Figure 3: Left: The test pattern. Right: The ViOptix logo
After a few seconds, the device will authenticate the battery and display the following screen:
Figure 4: Battery and configuration authentication screens
After battery authentication, the both operators will be prompted to work together install the
reusable main unit into the single-use sheath. The device will display an animation of the
process.
5.1.4 Step 4: Tab and Foam Removal
6. The sterile operator obtains the sheath, and removes the tab protecting the window by
pulling upwards on the exposed plastic component.
7. The sterile operator removes the protective foam tab from the device latch by pulling
downwards on the latch