ViOptix Intra.Ox 2.0, Инструкция по эксплуатации

Страница: 14 / 26

Part number:
OXY-2-DUR-IFU-1 Rev A
CONFIDENTIAL
Page 14 of 26
5.3
Measuring Percent Oxygen Saturation
Ensure the tissue is clean and the distal tip of the sheath is dry. Place the sensor face on the
patient in gentle contact with the tissue of interest. Continue to hold the device against the tissue
for a few seconds until an oxygen saturation percentage appears on the display. The display is
organized as depicted below:
Figure 5: Normal Display Layout
5.3.1 Powered Up Time Display
The total elapsed time that the device has been powered up is displayed in hours, minutes and
seconds in the lower left of the display after the device has warmed up.
Battery life is expected to last 8 hours of operating time including time in standby mode
5.3.2 Remaining Device Uses
The fraction at the top of the display indicates the remaining number of procedures for which the
re-usable durable device can be used. The re-usable durable device can be used for a total of 25
procedures.