User Manual
Arctic Substation Gateway
Firmware Version 2.4.x
27
Document Version 1
Figure 18. Network monitor configuration
When using VPN, the usage of the monitor is heavily recommended to detect
the connection drops.
4.2
Routing
4.2.1
Routing parameters
There are multiple configuration options that define the routing on Arctic
Substation Gateway:
■
Ethernet WAN - Gateway (IP address)
■
IP address of router used to reach the internet. Leave empty if unused.
■
Ethernet WAN - Backup Gateway (IP address)
■
IP address of backup router used to reach the internet. Leave empty if
unused.
■
WAN Failover - WAN Default Route (selection: Yes/No)
■
Usually "Yes" if default route is defined by "static routes". If the selection
logic is done on VPN level select "No"
■
WAN Failover - On Demand (selection: Yes/No)
■
Select "Yes" to activate the backup interfaces only when required. Select
"No" to have all the WAN interfaces to be available simultaneously for
e.g. VPNs.
■
WAN Failover - Primary WAN Interface (selection: None/Mobile WAN/
Ethernet WAN/Ethernet WAN Secondary)
■
WAN Failover - Backup WAN Interface(selection: None/Mobile WAN/
Ethernet WAN/Ethernet WAN Secondary)