7
904270 REV D 4/14/15, 1969-72 NOVA w/o AC CONTROL PANEL KIT PG 7 OF 16
CONTROL HARNESS
WHT/YEL
WHT/YEL
WHT
RED
DASH/FLR/DEF SLIDE
POT ASSEMBLY
WIRE
JACKET TIE WRAP
FORCE BEND
IN WIRES OVER STEP
STEP IN
CABLE CONVERTER
HOUSING
TIE WRAP
WIRE
JACKET
LOCATE THE CONTROL PANEL WIRE HARNESS AND PLUG THE CORRESPONDING WIRES INTO THE CORRECT
CABLE CONVERTER ASSEMBLY AS SHOWN IN FIGURE 5a BELOW.
FIGURE 5a
FIGURE 5b
ONCE WIRES ARE CORRECTLY PLUGGED INTO CABLE CONVERTER ASSEMBLY, SECURE WIRES TO THE CABLE
CONVERTER ASSEMBLY USING TIE WRAPS (SUPPLIED). SEE FIGURE 5b BELOW. THE TIE WRAP MUST BE LOCATED
BETWEEN THE END OF THE WIRE JACKET AND THE STEP IN THE CABLE CONVERTER HOUSING FORCING A
BEND IN EACH WIRE AS THEY PASS OVER THE STEP IN CABLE CONVERTER HOUSING. HEAD OF TIE WRAP MUST
FALL ON EDGE OF HOUSING AS SHOWN TO REMAIN TIGHT. ENSURE THAT THE TIE WRAPS ARE SNUG ENOUGH
THAT THE WIRES CANNOT MOVE. SEE FIGURE 5b.
