6
904270 REV D 4/14/15, 1969-72 NOVA w/o AC CONTROL PANEL KIT PG 6 OF 16
DASH/FLR/
DEF LEVER
OEM CABLE CLAMP
MOUNTING LOCATION
OEM
SCREW
3/16 PUSH-ON
RING
OEM CABLE
MOUNTING STUD
DASH/FLR/DEF CABLE CONVERTER ASSEMBLY
CABLE CONVERTER ASSEMBLY INSTALLATION
CABLE CONVERTER
ASM
FIGURE 5
INSTALL CABLE CONVERTER ASM ON THE DASH/FLR/DEF LEVER. SEE FIGURE 5 BELOW.
INSTALL CABLE CONVERTER LEVER PUSH ROD ONTO OEM CABLE MOUNTING STUD ON LEVER. SEE
FIGURE 5 BELOW.
SECURE THE CABLE CONVERTER ASM TO THE CONTROL PANEL USING THE OEM SCREW IN THE OEM CABLE
CLAMP MOUNTING LOCATION. SEE FIGURE 5 BELOW.
SINCE THE CABLE CONVERTER ASSEMBLY CAN SLIDE BACK AND FORTH IN CLAMP BEFORE SCREW IS
TIGHTENED,POSITION CABLE CONVERTER ASSEMBLY SUCH THAT THE FLAT PART OF THE ROD IS AS CLOSE
TO FLUSH AS POSSIBLE WITH THE END OF HOUSING AT THE LEVER’S INNER MOST POSITION. SEE
FIGURE 5 BELOW.
SECURE CABLE CONVERTER LEVER PUSH ROD ONTO OEM CABLE MOUNTING STUD USING 3/16” PUSH-ON
RING AS SHOWN IN FIGURE 5 BELOW.
END OF
HOUSING
END OF ROD
FLAT SECTION
FLUSH
1/8” MAX
NOTE: DO NOT ALLOW ROD TO
SEPARATE HOUSING WHEN
ROD IS IN INNER MOST POSITION.
ROD SHOWN
IN APPROX.
INNER MOST
POSITION
