Page 44
Duplicator 2.00
16.Shutdown
Shutdown
Press OK to Shutdown
Shutdown
Ready to Power Off
OK: 3 NG: 0 NB: 0
Input Bin > Drive02
Drive 1
OK: 1 NG: 0 NB: 0
Access Drive Log?
Once the duplication run is completed, the loader will remove the finished
disc from a drive and place the successful copy on the Output Spindle or if it
is a bad/NG copy, place it on the reject area. This will repeat for each drive.
The loader will then pick up another blank disc and load it into the drive. This is then repeated for each drive.
The copying process will continue until you either run out of blank discs or
until the count that you loaded into the counter is reached.
If you run out of blank discs and the job is not complete, the autoloader will give you an opportunity to fill the
spindle:
Important:
When you add discs to the input spindle, be sure to remove your finished discs from the
Output Spindle.
At this point you can either:
put more discs on to the input spindle and press the
ENT/Enter
button
to continue,
or press the
ESC/Escape
button to terminate your project.
Upon project termination, you shall see the
Access Drive Log
menu. You
can press the
ENT/Enter
button one more time to see the drive log that
indicates the number of passes and fails for every drive/tray, or simply press
the
ESC/Escape
button to go back to the main menu. If you choose to see
the drive log file, you will see a screen similar to below:
“Drive 1” indicates the below results are for the 1
st
drive.
“OK: 1” indicates there is “1” successful copy made by this drive.
“NG: 0” indicates there are “0” bad copies created by this drive.
“NB: 0” indicates there are “0” discs in this drive that were not recorded
due to non-recording error such as invalid media type, etc.
Use the
Up or
Down
buttons to look at the drive log file for the various
drives. Press the
ESC/Escape
button to return to the
1.Copy
menu
16. Shutdown
This function will make sure it is safe to turn off your autoloader. Once you see the
“Ready to Power Off”
message, you can safely turn off the machine using the power switch.
Turning off your autoloader without performing this function will increase the risk of damaging your
autoloader.
Press the
ENT/Enter
button to enter into this menu.
Press the
ENT/Enter
button to shut down the autoloader. The autoloader
will do all of its internal housekeeping and then display a confirmation
message:
“Ready to Power Off”
Press the power button to power off the system.
OK: 3 NG: 0 NB: 0
Drive01 -> Output Bin
Input Bin Empty
Reset Hopper?
Содержание ROBOTIC AUTOLOADER 3.5
Страница 1: ...User s Manual v3 5...