![background image](http://html1.mh-extra.com/html/vinpower/robotic-autoloader-3-5/robotic-autoloader-3-5_user-manual_1028397029.webp)
Page 25
Duplicator 2.00
1. Copy (SM)
Duplicator 2.00
8. Master Mode
Master Mode:
Single Master
Master Mode:
Multi Master
Duplicator 2.00
1. Copy (SM)
Duplicator 2.00
9. Erase
Counter:
No Counter
Loader Processing
Input Bin > Drive 1
Erase
Full Erase
Erase
Quick Erase
7. Select Source
The
Select Source
menu or the
Source
quick key is used to set the Master Reading Source. In the
autoloader, the Master Reading Source is always the Hard Drive.
8. Master Mode
The
Master Mode
menu is used to select between
Single Master
mode or
Multi Master
mode. For more
information on the modes,
see “Single Master and Multi Master Modes” on page 14.
If you are at the
Copy
Menu, do the following:
Use the
Up or
Down
button to find the
Master Mode
menu.
Press the
ENT/Enter
button on
Master Mode
to enter the menu and you will
see one of the following screens:
Use the
Up or
Down
button to choose between Multi Master mode
and Single Master mode. Press the
ENT/Enter
button to enter your
selection. The system will return you back to the main menu.
9. Erase
Use the
Erase
menu to erase your Rewritable discs.
Use the
Up or
Down
button to find the
Erase
menu.
Press the
ENT/Enter
button on
Erase
to enter the menu and you will see
the following screens:
There are two options:
Full Erase:
This option erases the entire disc, destroying all
previously written data in the process.
Quick Erase:
This option erases the index (TOC) of the Rewritable
disc, not the data section. It is much faster than Full Erase.
However, the data section is still recoverable. In order to ensure all
old content on the RW disc is completely ereased and unable to be
recovered for security purposes, you must utilize the FULL ERASE
function.
Use the
Up or
Down
button to select between the two options and press the
ENT/Enter
button to
continue.
Follow the instructions shown in “Setting Counters” on page 15 to continue.
Once the counters have been set, press
the ENT/Enter
button to confirm.
The Robotic Arm will initiate and pick the discs to be erased from the Input
Spindles and place them into the drives. As soon as the drives are all full, or
the number programmed into the counter is reached, you will see the
following:
Содержание ROBOTIC AUTOLOADER 3.5
Страница 1: ...User s Manual v3 5...