12
A100K10652
IP DECT 6000 System Installation & Configuration Guide
2.7.2.3 Electrical Requirements for Repeater
●
The power supply for the repeater must be 110 V to 120 V ac
nominal or 220 V to 230 V ac nominal, 50/60 Hz.
2.7.3 Handsets
2.7.3.1 Environmental Requirements
●
The area where the handset is used must be within the temperature
range of 0°C/32°F and 40°C/104°F.
● For correct battery charging, the room temperature must be between
0°C/32°F and 25°C/77°F. Therefore, the handset must not be placed
in direct sunlight. The battery has a built-in heat sensor which will
stop battery charging if the temperature is too high.
●
The area where the handset is used must be between 20% and 80%
non-condensing relative humidity.
2.7.3.2 Electrical Requirements
The following electrical requirement must be met:
●
The power supply for the charger must be 110 V to 120 V ac nominal
or 220 V to 230 V ac nominal, 50/60 Hz.
2.7.4 Maintenance Software
This section describes the computer requirements to run the installation
and maintenance tools of the handset and repeater.
2.7.4.1 Software Requirements
● Operating System: Windows 2000 (SP4), Windows XP (SP2),
Windows Vista
● CPU: Minimum 400MHz (2000/XP), 1GHz (Vista)
● RAM: Minimum 256 MB (2000/XP), 1 GB (Vista)
●
GPU/Display: XGA (1024x768)
●
Harddisk: Minimum recommended harddisk size by OS and other
installed applic 25 MB free space for the application.
)
Depending on other applications running on the system, CPU, RAM and harddisk
values may vary.
2.8 Installation Prerequisites
)
Ensure that a deployment plan has been conducted and that the installer has
access to these plans before proceeding any further. For more information about
deployment, see “Deploying the IP DECT Server 6000”
Before you start the installation you need to find the following information
and perform the following tasks:
●
ARI codes (serial numbers) for the Server 6000 (see label on the
rear of the package unit)
●
Serial numbers for handsets. Refer to “Retrieving the Serial Number
of the Handset”.
●
AC (Authentication Codes)
