vimec V 64, Использование и обслуживание

Страница: 15 / 64

15
a
7511131
9.2) Problem - Possible causes - Possible remedies
Skill level: O - Trained operator
10) WIRING DIAGRAMS
The electrical system diagrams are in the folder sup-
plied with the stairlift.
11) VIBRATIONS - AIRBORNE NOISE
a) Vibrations
The stairlift induces vibrations in the body and limbs of
the transported person having:
- low frequency and very low acceleration;
- short exposure times for the exposed person.
This parameter is therefore not significant for safety
purposes.
b) Airborne noise: less than 70 dBA.
12) INFORMATION ON DISPOSAL OF SUBSTANCES
AND PARTS OF THE STAIRLIFT
a) Disposing of rubber and plastics
Place in clean containers and consign to disposal cen-
tres authorised as required by the regulations in force.
b) Oils and toxic materials
The stairlift does not contain oil or toxic materials.
FIG.19
7512131
13) BATTERIES FOR BUZZER OPERATION (EN
8140 VERSION)
A battery is available to power the buzzer for stairlift
operation (Fig. 19/a).
In case of power failure, the buzzer is tripped to
signal the problem.
Problem
The stairlift does not move in
either travel direction.
The stairlift moves downward
more quickly then cuts out.
The stairlift does not move from
either end of the stair.
The stairlift does not move in one
direction.
The stairlift hits the stop buffers.
Possible causes
Control enabling key.
Emergency STOP pressed.
Differential security breaker
tripped.
No power supply.
A safety device has been
tripped.
Safety gear tripped.
Over-run safety device
tripped.
Control enabling key.
Possible remedies
Turn the key to ON.
Turn the button clockwise through 45°.
Press the reset button. If it does not
remain in the ON position, call in an
authorised VIMEC technician.
Check the power supply; see point 7.5
(operating by hand).
Call in an authorised VIMEC technician.
Call in an authorised VIMEC technician.
Call in an authorised VIMEC technician.
Turn the key to ON.
Check that there are no obstacles acti-
vating the safety devices (Fig. 5/c-d-e).
Call in an authorised VIMEC technician.