Vimar 01942, Инструкция по эксплуатации

Страница: 52 / 62

50
Operation of controls
GSM-BUS 1/1
C<n> TIMEDMAN
XX,X degrees
YY hours
Example
If the set user code is the default 1234 and you want to set the temporary manual operating mode with a
temperature of 225°C, for 3 hours, on the timer-thermostat 2, send the SMS:
1234.C2.TIMEDMAN.22,5.03
The GSM-BUS Communicator will reply with the following SMS:
GSM-BUS 1/1
C2 TIMEDMAN
22.5 degrees
3 hours
14.2. Scenario
Using the GSM-BUS Communicator 01942 it is possible to send the following command to the enabled sce-
narios
14.2.1 Activation
This is used to activate the scenarios that can be configured in the automation system for the lights, roller shut-
ters, air conditioning and loads
• Send an SMS message in the form of
<user code>.SC<n>.ON
where
<n>
identifies the number of the scenario to activate (132)
The Communicator will send an SMS confirmation message with the following format:
GSM-BUS 1/1
Scenario on: SC<n>
If the scenario SC<n> (with n between 1 and 8) has been assigned a text label, it is possible to activate the
scenario by using the label, as described below:
<user code>.<SC<n> label>.ON
Example
If the set user code is the default 1234 and you want to activate scenario no3, send the SMS:
1234.SC3.ON
The GSM-BUS Communicator will reply with the following SMS:
GSM-BUS 1/1
Scenario active: SC3