Vimar 01942, Инструкция по эксплуатации

Страница: 34 / 62

32
Enrolling devices
Example
If the set user code is the default 1234 and you want to read the associations of the thermostats (with C1
associated with zone 1 of the control panel of address 181 and C2 associated with zone 2 of the control
panel of address 181), send the following SMS:
1234.?CSET
The communicator will send the following SMS:
GSM-BUS 1/1
C1: z1,1.8.1
C2: z2,1.8.1
12.7 Enrolling the scenario of the control panels
This procedure is necessary to allow the GSM-BUS 01942 communicator to access the scenarios created on
the control panels
For it to be possible from a remote location to activate the scenarios created via the control panel, it is neces-
sary to configure the GSM-BUS communicator 01942 with the scenario enrolment procedure The GSM-BUS
Communicator 01942 is able to manage 8 scenarios via SMS messages (SC1SC8), with the possibility of
associating an SMS customized label to each one of them
It is anyhow possible to activate up to at most 32 scenarios via SMS and using the pre-set labels (SC1SC32)
Before being able from a remote location to manage the scenarios of the control panels, it is necessary to asso-
ciate them with the identification numbers of the ones that can be activated with the GSM-BUS communicator
The methods of access to the 32 scenarios that can be activated with the GSM-BUS communicator are sum-
marized in the following table
Scenario
index
Predefined SMS
label
Customizable
SMS label
Can be activated
via SMS
1 SC1 YES YES
2 SC2 YES YES
8 SC8 YES YES
9 SC9 NO YES
10 SC10 NO YES
32 SC32 NO YES
Two methods of enrolment are available:
– Automatic enrolment
– Manual enrolment
Both require the preliminary operation of choosing the scenarios that must be activated from a remote location
with the GSM-BUS communicator 01942 For this procedure refer to the instructions manual of the control
panel