Vimar 01942, Инструкция по эксплуатации

Страница: 24 / 62

22
General configuration
where
<n1...n8>
is the list of indices of the phone numbers for associating the group of SMS messages
Example
If the set user code is the default 1234 and you want to associate the group of SMS messages of the power
supply alarms with the phone numbers 1, 2 and 5, send the following SMS:
1234.SMSAR.NUM.125
n
Deleting association with phone numbers: used to delete the association between a group of SMS mes-
sages and all the phone numbers The procedure does not require any SMS message for confirmation from
the communicator
• For the INTRUSION ALARM group, send the following SMS:
<user code>.SMSAI.NUM.0
(zero)
Example
If the set user code is the default 1234 and you want to delete the association of the group of SMS mes-
sages of the intrusion alarms from all the phone numbers, send the following SMS:
1234.SMSAI.NUM.0
• For the TECHNICAL ALARMS group, send the following SMS:
<user code>.SMSAT.NUM.0
(zero)
Example
If the set user code is the default 1234 and you want to delete the association of the group of SMS mes-
sages of the technical alarms from all the phone numbers, send the following SMS:
1234.SMSAT.NUM.0
•
For the POWER SUPPLY ALARMS group, send the following SMS:
<user code>.SMSAR.NUM.0
(zero)
Example If the set user code is the default 1234 and you want to delete the association of the group of SMS
messages of the power supply alarms from all the phone numbers, send the following SMS:
1234.SMSAR.NUM.0
n
Reading association with phone numbers: used to know which phone numbers are associated with the
groups of SMS messages Send an SMS message in the form of:
<user code>.?SMS
The GSM-BUS Communicator will send a response SMS message with the list of all the associations
between the phone numbers and the groups of SMS alarm messages:
GSM-BUS 1/1
SMSAI: <list of associated phone number indices>
SMSAT: <list of associated phone number indices>
SMSAR: <list of associated phone number indices>