Vimar 01942, Инструкция по эксплуатации

Страница: 23 / 62

21
General configuration
This division enables sending the three “classes” of alarm messages to three groups of users, separating “safe-
ty” alarm messages (intrusion and tamper alarms) from “technical” ones and from “power supply” ones
Group name Description Alarms belonging to the group
“SMSAI” GROUP
Group of SMS alarms in the category of
INTRUSION ALARMS Intrusion alarm
Tamper alarm
“SMSAT” GROUP”
Group of SMS alarms in the category of
TECHNICAL ALARMS
Technical alarm 1
Technical alarm 8
“SMSAR” GROUP
Group of SMS alarms in the category of
POWER SUPPLY ALARMS No/Restore mains power alarm
SAI Backup Alarm on/off
Sending an alarm message (together with all those in the same group) is activated by associating the group with
at least one phone number on the list of phone numbers
Sending alarm messages can therefore be enabled or disabled according to the group to which they belong
For each group of alarm messages there are the following functions available, via SMS or PC
Note: For settings via the specific software on a PC, please refer to the relevant instructions manual
n
Association with phone numbers: used to associate the group of SMS messages with up to 8 phone num-
bers, configured as described in chapter 93 The procedure does not require any SMS message for confir-
mation from the communicator
• For the INTRUSION ALARM group, send the following SMS:
<user code>.SMSAI.NUM.<n1...n8>
where
<n1...n8>
is the list of indices of the phone numbers for associating the group of SMS messages
Example If the set user code is the default 1234 and you want to associate the group of SMS messages of
the intrusion alarms with the phone numbers 1, 2 and 5, send the following SMS:
1234.SMSAI.NUM.125
• For the TECHNICAL ALARMS group, send the following SMS:
<user code>.SMSAT.NUM.<n1...n8>
where
<n1...n8>
is the list of indices of the phone numbers for associating the group of SMS messages
Example If the set user code is the default 1234 and you want to associate the group of SMS messages of
the technical alarms with the phone numbers 1, 2 and 5, send the following SMS:
1234.SMSAT.NUM.125
•
For the POWER SUPPLY ALARMS group, send the following SMS:
<user code>.SMSAR.NUM.<n1...n8>