Vimar 01942, Инструкция по эксплуатации

Страница: 11 / 62

9
Configuration
Parameter Description Predefined value Permissible values
Editable SMS text message settings
Address
Text that can be added in an SMS alarm messa-
ge to provide information on the user or on the
location of the dwelling
<empty>
Maximum length: 80
characters
“Label”
Technical Alarm 1 Text of additional description of technical alarm
number 1
<empty>
Maximum length: 10
characters
“Label”
Technical Alarm 2 Text of additional description of technical alarm
number 2
<empty>
Maximum length: 10
characters
“Label”
Technical Alarm 3 Text of additional description of technical alarm
number 3
<empty>
Maximum length: 10
characters
“Label”
Technical Alarm 4 Text of additional description of technical alarm
number 4
<empty>
Maximum length: 10
characters
“Label”
Technical Alarm 5 Text of additional description of technical alarm
number 5
<empty>
Maximum length: 10
characters
“Label”
Technical Alarm 6 Text of additional description of technical alarm
number 6
<empty>
Maximum length: 10
characters
“Label”
Technical Alarm 7 Text of additional description of technical alarm
number 7
<empty>
Maximum length: 10
characters
“Label”
Technical Alarm 8 Text of additional description of technical alarm
number 8
<empty>
Maximum length: 10
characters
Parameter Description Predefined value Permissible values
By-me system device settings
System
configuration data
Control panel address, control panel information <empty>
<see system configura-
tion chapters>
Thermostat
configuration data Control panel address, temperature zone no,
control panel information
<empty>
<see thermostat con-
figuration chapters>
Group
configuration data Control panel address, group actuator data,
group no
<empty>
<see group configura-
tion chapters>
Scenario
configuration data
Control panel address, scenario no <empty>
<see scenario configu-
ration chapters>
Technical alarm
configuration data Contact interface address, information, control
panel
<empty>
<see alarm configuration
chapters>
Note
If configuration parameters are set with values that are not permissible, the GSM-BUS communicator will auto-
matically assign the nearest permissible value to the setting