Vimar 01942, Инструкция по эксплуатации

Страница: 32 / 62

30
Enrolling devices
Example
If the set user code is the default 1234 and you want to enrol the temperature zones of the control panel
associated with the SYS1 system, send the following SMS:
1234.SYS1.AAC
Note
Before automatically enrolling the temperature zones of a control panel it is necessary to have first enrolled
the control panel (see paragraph 121)
12.3.2 Manual enrolment of the control panel temperature zones
This procedure permits manually creating the association between a thermostat that can be controlled with
the phone communicator (C1,, C40) and an active temperature zone of a control panel It is also possible to
associate temperature zones of control panels that have not been enrolled by the phone communicator To do
this you need to know the address of the control panel where the temperature zone has been activated and
the index with which this control panel identifies this temperature zone (refer to the Air Conditioning chapter of
the instructions manual of the control panel) If you associate a temperature zone with a thermostat (C1,, C40)
enrolled beforehand, the preceding association will be overwritten by the new association The procedure can
be activated either with an SMS text message or via the EasyTool
• Send an SMS message in the form of
<user code>.C<n>.SET.<control panel address>.<m>
where
<n>
is the index of the timer-thermostat that must be associated with the temperature zone <m> of
the control panel with address
<control panel address>
The format of the address of the control
panel is described in paragraph 121
Note. The value of the temperature zone <m> can have values between 1 and 4 for control panels 14510,
16950 and 20510 and values between 1 and 40 for control panels 01950, 01951, 01952, 01956, 01958 and
01960
This command does not require an SMS confirmation message
Example (applies to control panel 14510, 16950 and 20510):
If the set user code is the default 1234 and you want to make an association between the thermostat C1 of
the GSM-BUS phone communicator 01942 and the temperature zone 2 of the control panel with address
181, send the following SMS:
1234.C1.SET.0108001.2
Example (applies to control panel 01950, 01951, 01952, 01956, 01958 and 01960):
If the set user code is the default 1234 and you want to make an association between the thermostat C1 of
the GSM-BUS phone communicator 01942 and the temperature zone 40 of the control panel with address
18170, send the following SMS:
1234.C1.SET.0108170.40