15
General configuration
Example If the set user code is the default 1234 and you want to set the number 333778899 in position 1,
send the following SMS:
1234.NUM1.333778899
n
Delete:
used to delete a phone number saved in one of the 8 positions The procedure does not require any
SMS message for confirmation from the GSM-BUS communicator
•
Send an SMS message in the form of
<user code>.NUM<n>.0
(zero)
where
<n>
is the memory location (from
1
to
8
)
Example If the set user code is the default 1234 and you want to delete the number in position 1, send the
following SMS:
1234.NUM1.0
9.4 Redirect phone number configuration
It is possible to configure the GSM-BUS Communicator so as to redirect any non-system SMS messages it
receives (for example, information sent by the phone carrier) to a specified phone number
•
Send an SMS message in the form of:
<user code>.RED.NUM<n>
where
<n>
is the memory location storing the phone number for redirecting (from
1
to
8
) The GSM-BUS
Communicator will send an SMS reply message with the following format:
GSM-BUS 1/1
SMS Redirect to number of index
Example If the set user code is the default 1234 and you want to redirect all the non-system SMS messages
coming to the GSM-BUS Communicator to the phone number of position 1, send the following SMS:
1234.RED.NUM1
The response SMS message sent by the GSM Communicator will be:
GSM-BUS 1/1
SMS Redirect to number of index
To turn off this function, send the following SMS:
<user code>.RED.NUM.0
(zero)
Содержание 01942
Страница 1: ...Instructions manual 01942 GSM BUS communicator...
Страница 2: ......
Страница 61: ...59...
