background image

9

Getting Started

Introducing the Village Collection
Gas Fireplaces

The Village Collection direct vent gas fireplaces are de-
signed to operate with all combustion air siphoned from
outside of the building and all exhaust gases expelled to
the outside.

The information contained in this 

Installers Guide

, unless

noted otherwise, applies to all models and gas control
systems. Gas fireplace diagrams, including the
dimensions, are shown in this section.

Pre-install Preparation

This gas fireplace and its components are tested and safe
when installed in accordance with this

Installers Guide

.

Report to your dealer any parts damaged in shipment,
particularly the condition of the glass. 

Do not install any

unit with damaged, incomplete, or substitute parts.

The vent system components and trim doors are shipped
in separate packages. The gas logs are packaged
separately and must be field installed.

Read all of the instructions before starting the
installation. Follow these instructions carefully during
the installation to ensure maximum safety and benefit.
Failure to follow these instructions will void the
owner’s warranty and may present a fire hazard.

The Quadra-Fire Warranty will be voided by, and Aladdin
Hearth Products disclaims any responsibility for, the
following actions

Installation of any damaged fireplace or vent system

component.

Modification of the fireplace or direct vent system.

Installation other than as instructed by Aladdin Hearth

Products.

Improper positioning of the gas logs or the glass door.

Installation and/or use of any component part not manu-

factured and approved by Aladdin Hearth Products, not
withstanding any independent testing laboratory or other
party approval of such component part or accessory.

ANY SUCH ACTION MAY POSSIBLY CAUSE A FIRE
HAZARD.

When planning a fireplace installation, it’s necessary to
determine:

Where the unit is to be installed.

The vent system configuration to be used.

Gas supply piping.

Electrical wiring.

Framing and finishing details.

Whether optional accessories—devices such as a fan,
wall switch, or remote control—are desired.

If the fireplace is to be installed on carpeting or tile, or on
any combustible material other than wood flooring, the
fireplace should be installed on a metal or wood panel that
extends the full width and depth of the fireplace.

Содержание QV32






































Отзывы: