23
MANIFOLD SEAL SERVICING
You will need these tools and parts to do the following:
Snap Ring Pliers
Tool, Weep Ring Puller, 708 Series: PN. 91-3827
Flat screw driver
Seal, HP (40): PN. 70-0071
Ring, Snap (42): PN. 70-6010
Assembly, Weep Ring (41): PN. 70-3018
Seal, LP (43): PN. 70-6009
Silicone Grease Lubricant: PN. 21-1122
Lint-Free Cloths
For manifold seal servicing purposes the manifold must be placed with the valve plugs sitting on a flat surface and the
plunger bores facing upward. This will facilitate service technician access to the seals for removal and installation, as
shown in Fig. 10.
Fig. 9: Orientation for Manifold Seal Servicing
With a flat screw driver remove the low-pressure seal (43). Manually remove the low-pressure seal spacer (39). With the
snap ring pliers remove the snap ring (42). Using the weep ring extracting tool remove the weep ring assembly (41) as
shown in Fig. 11.
NOTE
Pump manifold assembly must be detached from the crankcase assembly to service the seals.
NOTE
Extraction of the rings is accomplished by inserting tool in relaxed state into the inner diameter of the rings, then tighten
the expansion bolt to grip the ring. Install the extraction stand and nut, tightening nut will extract to weep ring and isolating
ring from manifold.
Содержание LW-160
