708 Series
High Pressure Titanium Positive Displacement Pump
24
Fig. 10: Weep Ring Extraction
With a flat screwdriver remove the high-pressure seals (40). Manually remove the high-pressure seal spacer (40).
You must clean and inspect the following parts for re-use:
•
Spacer, High-Pressure Seal (39): PN. 70-6016
•
Spacer, Low-Pressure Seal (39): PN. 70-6016
Insert the high-pressure seal spacer (39) into the bore.
Insert the high-pressure seal (40) into the bore until the seal is fully seated on the high-pressure seal spacer (39).
Insert the weep ring (41) into the bore after the installation of the high-pressure seals (39). Install the snap ring (42) using
the snap ring pliers.
Insert the low-pressure seal spacer (39) and press in the new low-pressure seal (43). The manifold seal servicing is
complete.
ATTACHING THE MANIFOLD TO THE CRANKCASE
You will need these tools and parts to do the following:
9/16” Socket/ Socket Wrench (for 708-5)
1/2” Socket/ Socket Wrench (for 708-3)
3/16” Allen Wrench (for 708-1)
Dead Blow Hammer
Dead Blow Hammer
Manifold Bolt (58): PN. 70-6055 (for 708-5)
Manifold Bolt (58): PN. 70-6008 (for 708-3)
Manifold Screw (58): PN. 70-6046 (for 708-1)
Ceramic Lubricant: PN. 85-0087
Anti-Seize Lubricant: PN. 85-0094
NOTE
A light coating of silicon grease (PN. 21-1122) should be used on all new o-rings and seals.
Use of any other type of grease may result in o-ring or seal failure.
NOTE
Ensure that the snap ring (42) is fully seated in the snap ring groove before continuing.
Содержание LW-160
