708 Series
High Pressure Titanium Positive Displacement Pump
6
2. Optimum pump performance and service life is obtained with 20 PSI (1.4 BAR) inlet pressure. With adequate
inlet plumbing, most pumps will perform with flooded suction. Maximum inlet pressure is 60 PSI (5 BAR).
3. After prolonged storage, the pump should be purged of air to facilitate priming. With the pump not running,
disconnect the discharge port and allow fluid to pass through pump, then reconnect the discharge port.
INLET ACCESSORIES
Inlet accessories are designed to protect against over pressurization, control inlet flow, contamination or temperature and
provide ease of servicing.
1. An inlet/supply shut-off valve is recommended to facilitate maintenance.
2. A standpipe can be used in some applications to help maintain a positive head in the inlet line.
3. Inspect and clean the inlet filters on a regular schedule, if applicable.
4. A vacuum/pressure gauge should be installed to monitor the inlet pressure. A gauge should be mounted as close
to the pump inlet as possible. Short term, intermittent cavitation will not register on a standard gauge.
5. All accessories should be sized to avoid restricting the inlet flow.
6. All accessories should be compatible with the solution being pumped to prevent premature failure or malfunction.
Содержание LW-160
