INSTALLATION
6
VMT - v. JUNE 2008
Figure 2.5: Connecting the Carbon Filter Outlet to the Separated Freshwater Flush Valve.
Using ½” diameter PVC hoses, connect all the feedwater components up to the main unit. Note the
boost pump outlet is a 3/8” barb fitting. Use a short section of 3/8” hose and then jump to ½” hose using
the step size adaptor provided.
BRINE DISCHARGE
Locate a convenient spot in the boat to install an overboard through-hull with an ½” diameter hole.
Discharge line is required to be
ABOVE
waterline (Refer to Figure 2.1). If connecting to a common
drain, tee in from above so that backflow contamination to the watermaker from other drains is not
possible.
PRODUCT WATER AND SAMPLE WATER
On both elbows off of the sample valve, connect a ¼” diameter PVC hose (or potable water hose), refer
to Figure 2.6. One hose is for product water sampling and the other hose is for feeding the ship’s
Freshwater Tank. The product tank hose off of the sample valve is to be fed into the top of the product
tank. Refer to Figure 2.1.
Figure 2.6: Little Wonder FRAME Sample Valve Connection.
Содержание LW-160
