MAINTENANCE
18
VMT - v. JUNE 2008
5.5
OIL CHANGE PROCEDURE
An oil change is recommended after the first 50 hours of RO use. Subsequent oil changes are to be
performed every 500-hour intervals OR changed annually. Change oil any time moisture is detected or
if oil is cloudy. For additional pump information, refer to
Section 10.0:
MANUFACTURER’S
LITERATURE
in back of this manual.
DO NOT RUN PUMP WITHOUT OIL IN THE CRANKCASE.
Step 1:
Turn off all power sources and switches.
Step 2:
Before changing the oil, obtain a container (i.e. tray or catch basin) to collect the oil drainage.
Step 3:
Remove the beige cover from the unit.
Step 4:
Remove the oil plug (Refer to Figure 5.1) and direct the oil to a catch basin. Allow the oil to drain empty.
Step 5:
Reconnect the oil plug or oil drain stopper. Then unscrew the oil cap and refill oil to fill line (located on
HP Pump sight glass). Check for leaks and re-secure oil cap.
Figure 5.1: Oil Drain Line on LW Frame
Содержание LW-160
