Villa Sistemi Medicali ENDOS AC, Руководство пользователя

Страница: 66 / 76

USER'S MANUAL
Messages on display
(Rev. 7) ENDOS AC/ACP - CE 61
8.2 8.2 8.2 8.2 Error signalling Error signalling Error signalling Error signalling
The ENDOS ACP and ENDOS AC timers are equipped with sophisticated
diagnostics that allow you to monitor all operating phases and related
safety devices.
Error messages which can be displayed are divided into three types:
•
errors, in the start-up phase, which require intervention on the part
of the Service Engineer;
•
re-settable errors, in the start-up phase;
•
errors found during the exposure phase.
The first type of error is found during the equipment start-up phase; if
there is a non re-settable condition alert, the equipment stops and does
not allow any operation. The condition is deleted just by switching the
equipment off and starting it again or proceeding as described in the
table in the following page. These anomalies have an error code of from
“
E01 E01 E01 E01 ” to “ E09 E09 E09 E09 ”.
Re-settable alert conditions stop some of the equipment’s functions, but
they allow some operations. These anomalies have an error code of “
E11 E11 E11 E11 ”
or “ E12 E12 E12 E12 ”.
Errors found in the exposure phase can also cause the timer to stop the
following exposures. These anomalies have an error code of from “
E20 E20 E20 E20 ”
to “ E25 E25 E25 E25 ”.
Refer to the following descriptions for each error type.