Villa Sistemi Medicali ENDOS AC, Руководство пользователя

Страница: 68 / 76

USER'S MANUAL
Messages on display
(Rev. 7) ENDOS AC/ACP - CE 63
8.2.2
8.2.2 8.2.2
8.2.2 Non fatal errors in start
Non fatal errors in start Non fatal errors in start
Non fatal errors in start----up phase
up phase up phase
up phase
If, during the TEST phase, one of the anomalies considered to be
"RE-SETTABLE" occurs, the equipment enters a condition where the
Anomaly signal is kept on display until you press one of the "increase" or
"decrease" keys which take the equipment back to the stand-by status
showing the exposure time on the display.
NOTE:
When the equipment gets more Anomalies simultaneously, touching the
"increase" and "decrease" keys at the same time will show all the errors
found on display in sequence. The equipment enters the stand-by status
only after the last display has been "reset" and highlighted to the user.
EXAMPLE:
Selection keys SIZE and TOOTH ANATOMIC already pressed at the Power-
on (TEST), we will have
:
The display signals the user the type of trouble found in the following
way:
DISPLAY
signal
ANOMALY Type
Acoustic
signal
E11
SIZE selection key pressed at start-up Absent
E12
Tooth ANATOMIC key pressed at start-up Absent