Villa Sistemi Medicali ENDOS AC, Руководство пользователя

Страница: 65 / 76

USER'S MANUAL
Messages on display
ENDOS AC/ACP - CE (Rev. 7) 60
•
X
X X
X----ray button released before exposure end
ray button released before exposure end ray button released before exposure end
ray button released before exposure end
The X-ray emission button is a "dead man" control; so it must be
held pressed during the whole exposure. If the button is released
before the exposure ends, the emission is automatically stopped; this
situation is shown on the display by the flashing message "E P", and
the luminous signals on the keyboard will be off. To reset this
condition, press "increase" or "decrease": the green LED will start
blinking without exposure and the tube cooling time countdown will
be shown. When the cool down is over the device goes back to the
IDLE state.
NOTE:
Before starting a new exposure, replace the film to avoid a double
exposure with meaningless diagnostic results.