Viking K-1700-BN-IP Скачать руководство пользователя страница 24

24

Related Products

The 

VE-LIGHT

 kit adds bright LED illumination to any VoIP entry phone that is 

housed in a Viking 

VE-5x5

VE-6x7

 or 

VE-5x10

 enclosure.  

The stainless steel bracket is easily mounted using existing holes and hardware. 
Two bright white LEDs are used as the light source, so there are no filaments to 
break or bulbs to burn out.  

12 VDC power adapter included. Any power source between 12 and 24 volts, AC or 
DC can be used to supply the 

VE-LIGHT

 with power. The 

K-1700-IP

 provides 12 

volts to power a 

VE-LIGHT

 (see features overview page 4). 

For more information, See 

DOD 428

.  

Add Panel Lighting to Your Viking VoIP Entry Phone

VE-LIGHT shown right with Viking 

E-30    and VE-5x5 (not included)

V

E

-G

N

P

-2

V

E

-G

N

P

-I

G

V

E

-G

N

P

-S

S

V

E

-G

N

P

VE-GNP-2

VE-GNP-IG

VE-GNP-SS

VE-GNP

Surface or Pedestal Mount Viking Products 

While Maintaining Weather and Vandal Resistance

VE-5x5

VE-5x5-SS

VE-5x5-RD

VE-5x5-PNL

VE-5x5-PNL-SS

VE-6x7

VE-6x7-SS

VE-6x7-PNL

VE-6x7-PNL-SS

VE-5x10

VE-5x10-SS

VE-5x10-PNL VE-5x10-PNL-SS

VE-3x5*

VE-5x10-NR VE-5x10-NR-SS

The 

VE-GNP

 gooseneck pedestals are designed to be used with the 

VE-5x5

VE-6x7

 and 

VE-5x10

 backboxes and are ideal for drive up communications. 

Note:

 The 

VE-3x5

 is not compatible with the 

VE-GNP 

pedestals.

  

The 

VE-PNL

’s are 

VE-Series 

backboxes with a blank aluminum panel. The 

user can customize the clear-coated aluminum panel to mount an 

PRX-1

 card 

reader, 

PRX-2 

keypad or switch.  The kits come complete with box, gasket, 

panel and screws. Model numbers that end with “SS” are stainless steel 
version.    

Note: 

The use of magnets to mount the 

VE-Series

 enclosure to a 

metal surface can affect the operation of the enclosed product. 

For more information, see 

DOD 424

The 

VE-3x5

VE-5x5

VE-6x7

 and 

VE-5x10

 add vandal 

and weather resistance, as well as versatility to many 
Viking products. The 

VE-Series

 backboxes are available 

in black fine texture powder painted steel or marine grade 
316 stainless steel. The weather resistant boxes are 
designed to be surface mounted to a wall, post, single 
gang box, or a 

VE-GNP

 gooseneck pedestal. 

Содержание K-1700-BN-IP



























Отзывы: