10
E. Manually Resetting the Security Code to Enter Programming
F. Manually Resetting All Network Parameters to Factory Default
Step 1.
Power down the
K-1700-IP Series
phone by disconnecting the LAN
Cable (RJ45 plug).
Step 2.
Press and hold the Call button, then reconnect the LAN
Cable (RJ45 plug).
Step 3.
Continue to hold t he Call button until you hear 2 beeps, (approximately 6 seconds). Continue to hold Call button until you hear 4 more
beeps, approximately 6 seconds later, then release the button. The LED will remain off for the first 3 seconds, flash slowly for 3
seconds (2 beeps), fast flash for 6 seconds (4 beeps), then light steady indicating when to release button.
Step 4.
You can now enter programming by following the steps in section
B
.
Step 1.
Power down the
K-1700-IP Series
phone by disconnecting the LAN
Cable (RJ45 plug).
Step 2.
Press and hold the Call button, then reconnect the LAN
Cable (RJ45 plug).
Step 3.
Continue to hold Call button until you hear 2 beeps, (approximately 6 seconds). Then release the button. The LED will remain off for
the first 3 seconds, flash slowly for 3 seconds then fast flash (after 2 beeps), indicating when to release button.
Step 4.
The security code is now reset to
845464
(factory default).
Step 5.
You can now enter programming by following the steps in section
B
.