8
Typical Installation on SIP Based VoIP Phone System
Optional
PoE Injector
(If VoIP PBX does
not have PoE)
Optional
Switch / Hub
(Extends range of cable, keeps
1 Gbps network speed for other
equipment on network)
SIP VoIP PBX
or
PC with
SIP Server
Software
100m (328 ft) max*
Viking
supplies
Customer’s
Responsibility
Internet
10/100 Mbps
Maximum
Viking
E-1600-BLTIPEWP
Emergency Phone
* Note:
A PoE extender can be used for an additional 100 meters per extender. For longer runs (up to 2 km / 1.2 miles)
a ethernet to fiber media converter can be used.
PC Requirements
• IBM
compatible personal computer with:
Windows 2000 (service pack 4 or higher)
Windows XP (service pack 2 or higher)
Windows Vista (SP2 or newer), 32 or 64 bit versions
and newer versions of Windows
•
Adobe Acrobat Reader 8 or higher
•
VoIP Tower Phone
hardware
•
Available LAN with PoE (class 1, < 4 Watts)
•
Ethernet cable ( CAT5 min.)
•
1 MB minimum free hard drive space for installation
• 16MB of free physical RAM
PC Programming
Download and install the programming software
1. Go to www.vikingelectronics.com and enter
E-1600-BLTIPEWP
in the search box
2. Click
E-1600-BLTIPEWP
in the search results
3. Scroll down the page to Downloads, click
IP Programming Software
4. Install the programming software by saving or opening the file and then clicking on
setup Viking IP
Programming.exe
5. Follow the prompts on your screen to complete software installation
6. To start the Viking IP Programming application, click on the Viking IP Programming icon on your desk
top. The Main screen will appear, allowing the user to program any
VoIP Tower Phone
connected to
that LAN.
Note:
PC must be connected to the same LAN as the
VoIP Tower Phone
.
