Viking Designer Topaz, Руководство пользователя

Страница: 42 / 80

42
Sewing Mode
This stitch cannot be sewn with twin needle
This pop-up message appears when the machine is set for twin
needle and you select a stitch that cannot be sewn with twin
needle. Press the OK button to close the pop-up.
This stitch cannot be sewn with Stitch Width
Safety on
This pop-up message appears when the machine is set for Stitch
Width Safety and you select a stitch that is wider than 0 mm.
Restart the buttonhole?
If you are sewing a buttonhole and stop to adjust the length
setting you will get this question once you start sewing again. If
you select “Yes”, the machine will restart and sew the buttonhole
from the beginning with the new settings. If you select “No”, the
change will be cancelled and the machine will continue sewing the
rest of the buttonhole with the previous settings. Use the arrow
buttons to select “Yes” or “No” and press the OK button.
Sensor One-Step Buttonhole Foot line up -
“Adjust white area to white line”
When you insert the fabric for sewing a buttonhole, the wheel
of the Sensor One-Step Buttonhole Foot might move. A pop-up
message prompts you to line up the white area with the white
line. Line up the white areas and close the pop-up message by
pressing the OK button.
Sensor One-Step Buttonhole Presser Foot
connected
The Sensor One-Step Buttonhole Foot can only be used for the
buttonhole stitches recommended for the foot. If the Sensor
One-Step Buttonhole Foot is connected and you select a stitch
that is not possible to sew with the foot, this message will appear
when you start to sew. Remove the foot or select a buttonhole
that can be sewn with the Sensor One-Step Buttonhole Foot.
Close the pop-up message by pressing the OK button.
Machine set for free motion sewing
This message is shown when the machine is set to Free Motion
Floating or Free Motion Spring Action and you turn on the
machine. Close the pop-up message by pressing the OK button.