Viking Designer Topaz, Руководство пользователя

Страница: 23 / 80

OFF
ON
23
1
Set Up
USB port
On the right side of your machine you will À nd a USB port to
connect your USB embroidery stick.
USB embroidery stick
Delivered with your machine is a USB embroidery stick.
Upon delivery the stick contains embroidery designs and one
embroidery font. Use the stick to save designs from your PC and
load them on your machine.
Note: Only original HUSQVARNA VIKING® USB embroidery sticks
will be supported.
Connect to and remove from USB port
Insert the USB embroidery stick in the USB port on the right side
of your machine. The USB plug can only be inserted one way -
do not force it into the port!
To remove, carefully pull the USB embroidery stick out straight.
Using the USB embroidery stick
A light at the end of the stick indicates that the USB embroidery
stick is plugged in correctly. When loading from the stick the light
Á ashes.
Note: Do not remove the USB embroidery stick while loading, adjusting or
stitching-out a design.
The USB embroidery stick provided with the machine can be left
in the machine when putting on the hard cover. Make sure that
the cover of the USB stick is turned downwards.