Viking Designer Topaz, Руководство пользователя

Страница: 35 / 80

1 2
3 4
Stitch length + Stitch length –
Stitch density – Stitch density +
35
2
Sewing Mode
Stitch Settings
Your machine automatically sets the best settings for the selected
stitch. The settings are visible on the GraphicDisplay. You can
make your own adjustments on the selected stitch using the + or
– buttons below the settings.
The setting changes only affect the selected stitch. Your changed
settings will be reset to default when selecting another stitch. The
changed settings are not automatically saved when turning your
machine off. You can save the adjusted stitch in My Stitches, see
page 40.
Note: When the number for stitch length/width/density or needle position is
set to default the
À gures will be black. If you change the number, the numbers
will be inverted on a black background. When trying to exceed minimum or
maximum settings a beep will be heard.
Stitch length (1)
Increase or decrease the stitch length using the the + or – button.
If lengthening a zigzag stitch or a decorative stitch, the entire
stitch will be longer. If lengthening a satin stitch, where the
density can be adjusted, the entire stitch will be longer but the
density will remain the same.
Stitch width (2)
Increase or decrease the stitch width using the + or – button.
Stitch density (3)
If you have selcted a buttonhole the GraphicDisplay will show
the density setting instead of the stitch length setting. You will
now be able to change the density setting by pressing the + and –
buttons.
If you press the Alternate View button the GraphicDisplay
will show the density setting for satin stitches. Use the + and –
buttons to change the setting.
Note This is often used with specialty threads and when a less dense satin
stitch is desired.
Needle position (4)
If a straight stitch is selected the needle position is shown on the
GraphicDisplay instead of the stitch width. The + and – buttons
are used to move the needle to the left or right in 29 positions.
Model 30: Stitch positioning
The Stitch Positioning function on model 30 makes it possible
to change the needle position of all stitches. Press the Alternate
View button and the GraphicDisplay will show the needle
position instead of the stitch width settings. You will now be able
to change the needle position to the left or right by pressing the
+ and – buttons. The needle position can only be changed to the
limit of the maximum stitch width. Changing the needle position
will also limit the stitch width adjustment.