153
DE
FR
NL
IT
EN
0478 131 9937 B - EN
Insert puller (I) into the carrier plate as
shown and turn anti-clockwise to the stop.
Support the machine with one hand.
Remove the carrier plate (1) by pulling on
the puller (I).
Installing the carrier plate:
Thoroughly clean the blade shaft (1) and
the mounting on the carrier plate (2). Push
the carrier plate as far as possible onto the
blade shaft.
●
16.7 Finding a wire break
The wire break search can be performed
either with the control panel removed or
inserted. The control panel should be
inserted for the fine search.
●
Before finding the wire break, the button
on the master docking station must be
pressed
once
(LED continues to flash
rapidly).
●
Remove the master docking station
cover and open the panel. (
1
Fold open the left clamping lever (1).
2
Remove wire end (2) from the terminal
block and then close clamping lever again.
●
Close the panel and fit the master
docking station cover. (
The following instructions describe how to
search for a wire break in a clockwise
direction, i.e. the perimeter wire is followed
in a clockwise direction starting at the
master docking station. If necessary, the
search can also be carried out anti-
clockwise, but in this case the right wire
end must be removed from the terminal
block.
●
Remove the control panel if necessary.
(
●
In the "Service" menu, select the "Find
wire break" entry and confirm OK.
(
In the event of a wire break, the red
LED on the master docking station
flashes rapidly. (
corresponding message appears in
the display of the robotic mower.
If a wire break cannot be found as
described, contact your specialist
dealer.
Содержание iMow MI 632 M
