Viglen CX135, Руководство пользователя, Страница: 75 / 93

Viglen CX135 User Guide – Version 1.0
74
6
6
.
. Appendices
Appendix A: BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time the
system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors
are those which will not allow the system to continue the boot-up
procedure. If a fatal error occurs, you should consult with your system manufacturer
for possible repairs.
These fatal errors are usually communicated through a series of audible beeps. The
numbers on the fatal error list, on the following page, correspond to the number of
beeps for the corresponding error. All errors listed, with the exception of Beep Code
8, are fatal errors. POST codes may be read on the debug LEDs located beside the
LAN port on the motherboard backplane.
A1
AMIBIOS Error Beep Codes
Beep Code Error Message Description
1 beep Refresh Circuits have been reset.
(Ready to power up.)
5 short, 1 long Memory error No memory detected in
the system.
8 beeps Display memory read/write
error Video adapter missing or
with faulty memory.