Viglen CX135 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 93

Viglen CX135 Скачать руководство пользователя страница 65

Viglen CX135 User Guide – Version 1.0

64

ACPI Configuration

This item allows the user to enable or disable ACPI support for the operating system.

ACPI Configuration

Use this feature to configure additional ACPI options. Select "Yes" if the operating
system supports ACPI. Select No if the operating system does not support ACPI.
The options are No and

Yes

.

ACPI 2.0 Features

Select Yes to allow RSDP pointers to point to the 64-bit Fixed System
Description Tables. Select No to deactivate this function. The options are Yes
and

No

.

ACPI APIC Support

Select Enabled to allow the ACPI APIC Table Pointer to be included in the
RSDP pointer list. The options are

Enable

, and Disabled.

AMI OEMB Table

Select Enabled to allow the OEMB Table Pointer to be included in the
R(x)SDT pointer lists. The options are

Enabled

, and Disabled".

Headless Mode

Select Enabled to activate the Headless Operation Mode through ACPI. The
options are Enabled, and

Disabled

.

Power Configuration

This feature allows the user to configure PnP settings.

Restore on AC Power Loss

This setting allows you to choose how the system will react when power returns after
an unexpected loss of power. The options are Stay Off, Power On and

Last State

.

Watch Dog Timer

This setting is used to enable or disabled the Watch Dog Timer function. It must be
used in conjunction with the WD jumper (see Chapter 2 for details). The options are

Disabled

and Enabled.

«
...
63
64
65
66
67
...
»

Содержание CX135






























































































Отзывы:

Нет отзывов