Viglen CX135 Скачать руководство пользователя страница 71

Страница: 71 / 93

Viglen CX135 User Guide – Version 1.0

The default settings are:

1st boot device – Floppy Drive

2nd boot device – S1 MPI Boot Support

3rd boot device – SATA0-#0 Mirror

4th boot device – IBA GE Slot 0508V

5th boot device – IBA GE Slot 0510V

Hard Disk Drives

This feature allows the user to specify the Boot sequence from available Hard
Drives.

1st Drive/2nd Drive/3rd Drive

Specify the boot sequence for 1st Hard Drive, 2nd Hard Drive, and 3

Hard Drive.

The options are HDD and Disabled.

Removable Drives

This feature allows the user to specify the Boot sequence from available Removable
Drives.

Drive

Specify the boot sequence for 1st Removable Drive. The Options are

Floppy

Drive

and Disabled.

CD/DVD Drives

This feature allows the user to specify the boot sequence from available CDROM
Drives.

1st Drive

Specify the boot sequence for 1st Hard Drive. The options are

CD ROM

and

Disabled.

Содержание CX135






























































































Результаты поиска

Содержание CX135

Отзывы:

Viglen CX135, Руководство пользователя, Страница: 71 / 93

Результаты поиска

Содержание CX135

Отзывы: