Viglen CX135 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 93

Viglen CX135 Скачать руководство пользователя страница 70

Viglen CX135 User Guide – Version 1.0

69

BIOS Settings Configuration

Quick Boot

If Enabled, this option will skip certain tests during POST to reduce the time needed
for the system to boot up. The options are

Enabled

, and Disabled.

Quiet Boot

Set this value to allow the boot up screen options to be modified between POST
messages or OEM logo. The default setting is

Enabled

. Select Disabled to allow the

computer system to display the POST messages. Select Enabled to allow the
computer system to display the OEM logo.

Add-On ROM Display Mode

Set this option to display add-on ROM (read-only memory) messages. The default
setting is

Force BIOS

. Select "Force BIOS" to allow the computer system to force a

third party BIOS to display during system boot. Select "Keep Current" to allow the
computer system to display the BIOS information during system boot. The options
are Force BIOS and Keep Current.

Boot up Num-Lock

Set this value to allow the Number Lock setting to be modified during boot up. The
default setting is

On.

The options are On and Off.

PS/2 Mouse Support

Set this value to allow the PS/2 mouse support to be modified. The options are

Auto

,

Enabled and Disabled.

Wait for ‘F1’ If Error

Select Enable to activate the function of Wait for F1 if Error. The options are

Enabled

and Disabled.

Hit ‘DEL’ Message Display

Select Enabled to display Setup Message when the user hits the DEL key. The
options are

Enabled

and Disabled.

Interrupt 19 Capture

Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and

Disabled

.

Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot Device.

The settings are "1st Floppy Drive", "CD ROM", "ATAPI CDROM", and "Disabled."

«
...
68
69
70
71
72
...
»

Содержание CX135






























































































Отзывы:

Нет отзывов