
Viglen CX135 User Guide – Version 1.0
58
IDE Configuration Sub-Menu
When you select this Sub-menu, AMI BIOS automatically displays the following
items:
IDE Configuration
This feature allows the user to configure the IDE mode. The options are: Disabled,
P-ATA (Parallel ATA) only, S-ATA (Serial ATA) only,
P-ATA & S-ATA.
S-ATA Ports Definition
This feature allows the user to configure Serial ATA Ports. The options are:
P0-Master/P1-Slave, P0-Slave/P1-Master.
Combined Mode Operation
This feature allows the user to select the IDE Combined Mode. The options
are: P-ATA 1
st
Channel and
S-ATA 1
st
Channel.
Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE
Master/Slave, Fourth IDE Master/Slave Sub-Menu
From the Advanced Setup screen, press <Enter> to access this sub menu for the
primary, secondary, third and fourth IDE master and slave drives. Use this screen to
select options for the Primary and Secondary IDE drives. Use the up and down
<Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the
value of the selected option.
TYPE
Select the type of device connected to the system. The options are Not
Installed,
Auto
, CDROM and ARMD.
LBA/Large Mode
LBA (Logical Block Addressing) is a method of addressing data on a disk
drive. In the LBA mode, the maximum drive capacity is 137 GB. For drive
capacities over 137 GB, your system must be equipped with 48-bit LBA mode
addressing. If not, contact your manufacturer or install an ATA/133 IDE
controller card that supports 48-bit LBA mode. The options are Disabled or
Auto
.
Block (Multi-Sector Transfer)
Block mode boosts IDE drive performance by increasing the amount of data
transferred. Only 512 bytes of data can be transferred per interrupt if block
mode is not used. Block mode allows transfers of up to 64 KB per interrupt.
Содержание CX135
