Vigilant
Inc.
Assembly Instructions for Sentinel End Table
Page
9
•
Align the barrel on the inside of the hinge arm with the two teeth on the front of the hinge plate and
press the hinge onto the plate by first pushing back then down onto the plate until it snaps into place
(see image 8a).
Figure 8a: Door hinge
•
Repeat for the second hinge. You may need to rotate the adjustment screws on the hinge plates in
order to get proper vertical alignment between the two hinges.
•
Close the door and check it for proper alignment. If the door is not closing properly or does not align
exactly with the cabinet front then some simple adjustments will be required.
Figure 8
