Vigilant
Inc.
Assembly Instructions for Sentinel End Table
Page
7
Step 5: Turn the cabinet upright. Locate the front base trim and align with the bottom trim on sides. Slide
into the front base of the cabinet. Secure in place by tightening three cam fittings inside bottom front of the
cabinet. Turn firmly, but do not over-tighten.
Step 6: Place the tabletop on top of the sub-top panel with finished side up. Align the table top on the
cabinet using provided spacer block for the ¾” overhang on sides and back. The front will overhang by 1-
1/2”. Secure the tabletop panel with 4 1-1/4” screws in pre-drilled holes using a screw gun or power drill. You
will be working from inside the cabinet.
Figure 5 and 6
