VCOP Gold User Manual
Vighnaharta Technologies Pvt. Ltd. Page
20
of
44
1.
Type the desired message at the place of stand by message “
V-COP GOLD
” with the help
alphanumeric keys.
Note
: For forward or backward movement, press Arm/Disarm (Lock) key and then forward or
backward arrow key and you can only enter the 16 small caps character message.
2.
Press
Enter
key to save the stand by message.
Panel ID Configuration
This will set the Panel Id of that particular system. There can be various panels connected at the
site; this parameter helps to collect data from particular panel number.
Note
: This menu is valid for V-cop Gold-IP Model.
4.2.3 User Configuration 3 / 5
To select
Key fobs,
press
MENU 1
key. The LCD displays as shown below.
To select
Sensors
, press
MENU 3
key.
4.2.4 Key Fob
Key fob is nothing but remote control of the system. The installation of a remote control is called
learning the key fob. An un-installation of a remote control is called De-learning the key fob.
System can have max 4 key fobs. If user wishes to install more than one key fob (key fob2-key
fob4), press
Enter
key and move to next key fob installation.
User Config 3/5
Keyfobs Sensors
Keyfob1 Absent
Activate
Arm
key
Perimeter
Arm
key
Disarm
key
Panic
key
LED
indication
for key press
