VCOP Gold User Manual
Vighnaharta Technologies Pvt. Ltd. Page
10
of
44
3.2
Press this key to Arm the system.
3.3
Press this key to Disarm the system.
3.4
Press this key to Perimeter Arm system.
3.5
Enter
To save the selected option and to scroll between various options
Enter key is used.
3.6
Menu 1
Menu key1. In disarmed state, it allows user to select various
menus for setting date and time, system configuration and reboot.
3.7
Menu 2
Menu key2. In disarmed state, it shows the network strength in
percentage. (For models installed with GSM module)
3.8
Menu 3
Menu key3. In disarmed state, it allows user to view event log.
3.9
Alphanumeric keys
Combinations of alphanumeric keys (10 keys) allow entering
various text messages as well as settings, passwords and so on.
Forward: To move forward, press
Enter
key.
Backward: To move backward, press
ESC
key.
7 NO Key: TO scroll the cursor backward
9 No Key: TO scroll the cursor Foreword
3.2 Power ON The System
Check the proper wiring and connection before power ON the system, insert the adapter of the
system into power socket and put it ON.
After reading zones connected to the system,
VCOP GOLD
as a stand by message on first line,
date and time on second line appears as shown below.
Then system checks for the system level faults. If any fault exists in the system, faults scroll on
the display putting Fault indicator ON.
To change this message “
VCOP GOLD
”, go to Config --> System --> User Config 2 /5 --> Syst-
Name.
3.3 View Event Log
V-COP GOLD
25/08/2012 3:58
