VCOP Gold User Manual
Vighnaharta Technologies Pvt. Ltd. Page
19
of
44
4.2.2 User Configuration 2 / 5
To select
Syst-Name
configuration, press
MENU 1
key.
To select
PAN ID
configuration, press
MENU 3
key.
Syst-Name Configuration
This is the stand by message appears on first line of LCD display after power on. User can change
this text message.
Siren
This is the time during which
siren continues to blow after
alarm condition occurs.
Enter the number from 1 to 20 min as
desired.
Note
: By default the siren on time is 1
minute.
Entry
This is entry delay of the system.
Enter number from 10 to 90 sec as desired.
Note
: By default the Entry on time is 60
seconds
Exit
This is exit delay of the system.
Enter number from 10 to 90 sec as desired.
Note
: By default the Entry on time is 60
seconds
Periodic
This is periodic delay for frame
transfer
of
communication
status(If communication is going
on, frame will be sent after every
defined
minutes
to
the
monitoring system).
Enter number from 01 to 15 min as desired.
Note
: Applicable for V-cop Gold-IP model
only. By default the Periodic delay is 10
minutes.
Schedule
This is Schedule frame Allows
you to Schedule the System
armed for particular time frame
Set start time and end time, it should be
minimum 1 min.
For Eg:
i.e: Panel Armerd automatically at 7:15 AM
and Disarmed automatically at 18:15 PM
User Config 2/5
Syst-Name PAN ID
Edit System Name
V-COP Gold
Set Entry Delay
(10-90)Sec : 30
Set Exit Delay
(10-90)Sec : 60
SetPeriodicDelay
(01-15)Min : 10
Set Schedule Time:
Start END
Edit Start Time:
07:15 (HH:MM)
Edit End Time:
18:15 (HH:MM)
