ViewSat VSMAXHD, Руководство пользователя

Страница: 6 / 23

9 10
3.2. REAR PANEL 3.3. REMOTE CONTROL UNIT
REMOTE CONTROL UNIT
1) LNB IN:
This port is to connect the coaxial cable from LNB of your Dish. The IF
input is provided through this port and the input frequency range is 950~2150MHz.
Also , the voltage switching 13V and 18V is passed through this port.
2) IF OUT:
To enable the connection of an analog receiver, the receiver is provided
with this port. Connect this port to LNB IN port of the other receiver via RF Cable.
3) SERIAL PORT:
Connect your receiver to a computer with a serial cable. This port
can be used for upgrading software.
4) USB HOST PORT:
This is used to connect your USB Device to your receiver.
(Either front side USB port or rear side must be selected in the menu.)
5) HDMI:
To connect HDMI input of TV or PC monitor.
6) VIDEO, AUDIO R/L, COMPONENT(Y, Pb, Pr):
These RCA connectors are used
to connect any external video and audio.
7) S/PDIF DIGITAL OUTPUT:
This port is for the connection to the external Hi-Fi
system which has an optical S/PDIF input interface
(Option)
.
8) S-VIDEO:
Connect to your TV with a S-Video cable.
9) POWER INPUT:
This is the AC main power cord. The input AC volts range is 95V
to 240V, 50Hz/60Hz supply.
10) POWER SWITCH:
This is a switch to turn on and off the AC main power.