No. Description
Optional values
subject to version
(converted value)
Standard
setting
22
Reset all parameters to their factory
settings
0 to 1
0-no
Changing the remote control settings
Only authorised contractors are per-
mitted to change the settings
described on the following pages.
Incorrect adjustments can result in
incorrect operation.
Note
Incorrect operation by system users
will invalidate our warranty.
General procedure for setting the
parameters described in the following:
1.
Set the rotary selector to
"MENU".
2.
xw
Select parameter: "Service
settings".
3.
d
Select the required para-
meter.
4.
xw
Change parameter value.
5.
d
to save the modified value.
As confirmation, the value
first disappears and then
flashes three times after
releasing the keys.
Note
Parameter selection cannot be
reset as a whole. All individual
parameters must be confirmed in
sequence with
d
, to return to the
start, i.e. the standard display.
The standard display will be shown
again if no key is pressed for more
than 5 min.
6.
Now, additional adjust-
ments can be made in
accordance with steps 3 to
6.
Note
The standard display will be shown
again if no key if pressed during the
adjustment procedure for more than
1 min.
Parameter 05: Fixed pressure imbalance
This function enables the creation of
over or underpressure inside a build-
ing. Creating overpressure may be
appropriate to compensate for leaks
in the building.
Creating underpressure is inadvisable
as it could lead to air being induced
through a chimney, for example.
Remote control settings by contractors
(cont.)
35
Remote control settings
5692
762
GB
Содержание VITOVENT 300
Страница 44: ...Version 180 m3 h Parts list cont 44 Parts list 5692 762 GB...
Страница 46: ...Version 300 and 400 m3 h Parts list cont 46 Parts list 5692 762 GB...
Страница 47: ...List of control parameters 47 Commissioning service reports 5692 762 GB...
Страница 48: ...Commissioning report example 48 Commissioning service reports 5692 762 GB...
