Viessmann Vitoflex 300-RF 150 Скачать руководство пользователя

Страница: 6 / 80

5797 340 - 01

Vitoflex 300-RF Installation & Operating

Important Regulatory and Installation Requirements

Take note of all symbols and notations intended to draw attention to potential hazards or important

product information. These include ”WARNING”, ”CAUTION”, and ”IMPORTANT”.

Codes

The installation of this unit shall be in accordance with

local codes. In the absence of local codes, use:

B365-10, Installation Code for Solid-Fuel Burning

Appliances and Equipment.
All electrical wiring is to be done in accordance with the

latest edition of CSA C22.1 Part 1 and/or local codes. In

the U.S. use the National Electrical Code ANSI/NFPA 70

where required by the authority having jurisdiction.

Mechanical room

Ensure the mechanical room complies with the

requirements listed in this manual. See section entitled

Mechanical Room.

Working on the equipment

The installation, adjustment, service, and maintenance

of this boiler must be done by a licensed professional

heating contractor who is qualified and experienced in

the installation, service, and maintenance of hot water

boilers. There are no user serviceable parts on the boiler,

or control.
Ensure main power supply to equipment, the heating

system, and all external controls have been deactivated.

Take precautions to avoid accidental activation of power

during service work.

Technical literature

Literature applicable to all aspects of the Vitoflex 300-RF

wood-fired boiler:
- Installation and Operating Instructions
- Service and Maintenance Instructions
- Field Wiring Diagram



Please carefully read this manual prior to attempting

installation. Any warranty is null and void if these

instructions are not followed.

For information regarding other Viessmann

System Technology componentry, please reference

documentation of the respective product.

We offer frequent installation and service seminars

to familiarize our partners with our products. Please

inquire.



The completeness and functionality of field supplied

electrical controls and components must be verified

by the heating contractor. These include low-water

cut-offs, flow switches (if used), staging controls,

pumps, motorized valves, air vents, thermostats, etc.



Leave all literature at the installation site and advise

the system operator/ultimate owner where the

literature can be found. Contact Viessmann for

additional

copies.



This product comes with several safety instruction

labels

attached.

Do not remove!

Contact Viessmann immediately if replacement labels

are

required.

General Information

Содержание Vitoflex 300-RF 150

















































































Результаты поиска

Содержание Vitoflex 300-RF 150

Отзывы:

Похожие инструкции для Vitoflex 300-RF 150

Бренды по названию

Популярные бренды

Viessmann Vitoflex 300-RF 150, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Vitoflex 300-RF 150

Отзывы:

Похожие инструкции для Vitoflex 300-RF 150

Бренды по названию

Популярные бренды