manualshive.com logo in svg

Viessmann Vitoflex 300-RF 150, Инструкция по установке и эксплуатации, Страница: 45 / 80

Поделиться
Скачать
Viessmann Vitoflex 300-RF 150 Скачать руководство пользователя страница 45

45

5797 340 - 01

Vitoflex 300-RF Installation & Operating

Operation

 Default Display 

(continued)

Header and footer on the programming unit
Header
“Menu”

This takes you to the menu screen, see page 46.
System is currently switched on. You can switch the system off.

System is currently switched off. You can switch the system on.

No faults in the system
System fault

“Load” etc.

Shows the current operating state, see page 41.

“Boiler technician”

As Boiler technician, you can switch the heating system on and off and change system

parameters. You can switch to the “Observer” user group.

“Observer”

As Observer, you can only view the controller screens and activate automatic mode from the 

default display.
A component is currently in manual mode.

You can switch on manual mode. When you do so, all components which are in manual mode 

are switched back to automatic mode.
System is currently in automatic mode.

Colour of symbol: Green

Time (e.g. 10:39)

Set the date and time via a window.

Footer

Returns you to the default display.

Takes you back one level.

You can scroll back a maximum of 19 screens.

“Overview”

This takes you to the detailed view.

“Details”

This takes you to the overview display.
This takes you to the fault messages.

Symbol colors:

Grey = Currently no fault messages

Yellow = There is a warning

Red = There is a fault
Takes you to the auxiliary system screen, see page 71, 72.

Takes you to the heat distribution screen, see page 73, 74.

Содержание Vitoflex 300-RF 150

















































































Отзывы:

Нет отзывов