Chapter 3: Configuring VidyoPanorama
38
CONFIGURING THE VIDYOPANORAMA SETTINGS AND OPTIONS
The VidyoRemote Configuration tab enables you to configure various VidyoPanorama settings and options,
including cluster information, network controls, video encoding and decoding preferences, and other
options. You should configure these settings immediately after logging in to the Admin pages for the first
time, and you should only change these settings when you are not in a call.
Configuring the Cluster
To configure the cluster:
1.
Select the Admin page Configuration tab.
2.
If needed, click the blue triangle next to the word
Cluster
to view the cluster settings.
3.
Enter the cluster name in the
Cluster Name
field.
This is the cluster name that you created when you first accessed the web site for the Decoder
Nodes (for more information, see the “Assigning the Cluster Name and Node Names” section on
page
29
).
4.
Enter the node name in the
Node Name
field.
This is the node name that you created when you first accessed the web site for the Decoder Nodes
(for more information, see the “Assigning the Cluster Name and Node Names” section on page
29
).
