Vidikron VDP-720, Руководство по эксплуатации для владельца

Страница: 40 / 56

Operation
30 Vidikron VDP-80-720 Owner’s Operating Manual
PRE
L
IMINAR
Y
Select Color from the Color Settings menu. While looking at the color bar pattern through a
blue filter, adjust the color saturation level until the outermost (gray and blue) color bars
appear to be a single shade of blue. Press
OK to confirm the setting.
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image appears
greener.
To set the tint, select Tint from the Color Settings menu. While looking at the color bar
pattern through a blue filter, adjust the tint level until the cyan and magenta color bars (on
either side of the green bar) appear to be a single shade of blue. Press
OK to confirm the
setting.
Color Red/Tint Red/Color Green/Tint Green: If necessary, you can change the color density
and/or hue for the red and green channels using these controls. Doing so alters the hue of
that color and affects the gamut (range) of possible colors. For example, changing the “Tint
Red” value moves the color closer to either yellow or magenta, which in turn affects all
displayed colors having a red component.
Chroma Filter: Some digital video sources, such as DVD players, have an error in design that
affects the color (Chroma) video quality. Use the Chroma Filter can be enabled to mitigate
this error. For high quality sources that do not have the Chroma artifact, disabling the
Chroma Filter may increase Chroma resolution. The Chroma Filter is off by default.
Like the brightness and contrast controls, the color and tint controls are
interactive. A change to one may require a subtle change to the other in
order to achieve the optimum setting.
gray
yellow
cyan
gr
een
magenta
re
d
blue
Note