manualshive.com logo in svg

Videx GSM Lite 4000 Series, Техническое руководство

Поделиться
Скачать
Videx GSM Lite 4000 Series Скачать руководство пользователя страница 41

66250756-EN - V2.1 - 05/11/19 

- 41 -

4000 Series GSM Lite Audio Intercom - Technical Manual

4000 Series GSM Lite Audio Intercom

The GSM Mobile App

THE VIDEX SMS WIZARD

In addition to programming by direct text messages it is also possible to program the GSM LITE intercom 
using the GSM mobile app, the 

Videx SMS Wizard

.

The SMS wizard can be used to simplify the programming of the GSM intercom using SMS messages.

The SMS wizard generates the text message required to communicate with the GSM intercom. Depending on the model of the 
GSM (digital GSM, GSM PRO, GSM Lite, GSMVRK and 2270 GSM module) text messages can be generated to program features such 
as access codes, proximity access fobs/cards, dial to open (

DTO

) telephone numbers, assign pre-existing access levels, free access 

periods and call button/apartment telephone numbers.

Other features are also included to simplify the programming setup process. Additionally it is also possible for users to control their 
gate or door via the dial to open (

DTO

) or text message features.

WHERE TO DOWNLOAD THE SMS WIZARD AND GETTING STARTED

The SMS wizard is available for both Android smart devices (mobile smartphones and tablets) and also Apple iOS (iPhones and 
iPads) and can be downloaded for free from the Google Play Store (for Android devices) and the App Store (for iOS devices).

Before using the SMS wizard the following details will be required for initial setup:

•  Model of the GSM intercom module -

 e.g. Art.4811 (GSM LITE), Art.4812 or Art.4812R (digital GSM) etc.

•  Firmware level of the GSM intercom -

 e.g. for the Art.4811 GSM LITE the firmware might be 

LT3.0.4

 (the firmware 

version of the GSM module can usually be found on the label on the back of the GSM intercom or by sending the text 
message 

1111VER?

 to obtain the firmware version, also refer to notes on page 34).

•  Telephone number of the GSM intercom -

 i.e. the mobile number of the SIM card being used in the GSM module.

•  Master code of the GSM intercom -

 i.e. the 4 digit code used for programming, by default this is set to '

1111

'. In the 

event that this code has been forgotten or lost please refer to '

change the 4 digit master code (CDE)

' notes on page 35 

or '

resetting the master code to 1111

' notes on page 26 to reset the code back to factory default if required.

Once downloaded and installed it is recommended that you first tap on the help icon 

?

 in the top right corner of the app's 

homescreen and then follow the '

TO GET STARTED

' quick guide.

It should also be noted when navigating between the app's menu to the required programming screens the help icon 

?

, always 

located in the top right corner of each screen, can be used to offer additional guidance on how to use the current programming 
screen.

SMS WIZARD APP COMPATIBILITY

The SMS wizard is compatible with the latest GSM intercoms and modules available. It is also compatible with the older Art.4810N 
model from firmware version 

1.0.4

 onwards.

Содержание GSM Lite 4000 Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды