95
Click “Delete Group” button, the interface is shown as in Figure 7-34.
Note: You can only delete empty group (E.g.: There is no user in current group).
Figure 7-34
7.7.1.3 Modify Group
Click modify group, the interface is shown as in Figure 7-35. You can modify group
name and then click “power” button to set proper right for the whole group.
Figure 7-35
7.7.1.4 Add User
Click “Add User” button the interface is shown as in Figure 7-36.
Input user name, password, and then input password again to confirm.
Figure 7-36
7.7.1.5 Power
When you add new user or new group (such as in Figure 7-33,Figure 7-36. ), click
“power” button, the interface is shown as in Figure 7-37. Here is for you to set user’s
power.
There are three power groups: main control power/monitor power/playback power.
You can draw a
√
before the checkbox to enable corresponding function.
